3D Printer Issues
This section deals with printer level issues
Nozzle clogs happen for any number of reasons, but
they are always frustrating. Some degraded filament may have gummed up the extruder,
or a bit of a dust...
Mon, 11 Jan, 2016 at 7:35 PM
Storage of filament
Before we begin to discuss the various methods of storing the filament , let me describe the prime cause of ...
Sat, 7 May, 2016 at 6:43 PM
Functioning of cooling fan of feeder block is very important for FlashForge Dreamer 3D printer. If the fan isn't working, the extruder roll...
Sat, 23 Apr, 2016 at 6:07 PM
Description: In upgraded version of Creatbot DM plus, an all metal hotend is used. All metal hotend can reach a temperature of upto 300 degrees ce...
Sat, 23 Apr, 2016 at 6:56 PM
Description: When unloading a filament in Ultimaker, a small piece of molten filament is stuck in the feeder guide tube
Action: To remov...
Sat, 23 Apr, 2016 at 7:11 PM
Description: While printing with ABS material in Creatbot 3D printer, after some time the print gets stopped and max. temperature error will appea...
Sat, 23 Apr, 2016 at 7:20 PM
Description: While printing, Ultimaker machine does a wired sound and print gets stopped all of a sudden. Turned off the printer and observed that...
Wed, 27 Apr, 2016 at 6:11 PM
Description: Creatbot DX 3Dprinter stopped extruding. Check if the nozzle is clogged, if the filament got stuck in the feeder guide (Teflon tube), if the...
Wed, 27 Apr, 2016 at 6:23 PM
Makerbot Smart Extruder
Description: When we tried loading the filament, it was not going inside the nozzle. Tried all the techniques but no r...
Wed, 27 Apr, 2016 at 6:38 PM
Description : The print head was displacing to one side in Makerbot 5th generation 3D printer. Verified the timing belt, pulley and gantry assemblies but t...
Wed, 27 Apr, 2016 at 6:43 PM