3D Print Issues
This folder deals with various 3D printing issues
Build volume is one of the most important criteria for consideration while purchasing a 3D printer.
Based on the size of the object that you want to prin...
Tue, 16 Jun, 2015 at 12:24 PM
Resolution typically refers to the Z minimal layer thickness and X-Y resolution that can be achieved by the 3D printer. Since all FDM 3D printers create par...
Tue, 16 Jun, 2015 at 3:45 PM
STL
is the standard file type used by most additive manufacturing systems. STL is a
triangulated representation of a 3D CAD model
The triang...
Tue, 16 Jun, 2015 at 4:56 PM
Always clean your thinkfab and make sure everything is tight and secure. You should develop some type of schedule to care for your thinkfab depending on you...
Tue, 16 Jun, 2015 at 6:43 PM
Desktop 3D printers generally save time and material by making the interior region of the printed object not completely solid. The inside region of the 3d p...
Tue, 16 Jun, 2015 at 8:32 PM
1) The gap between nozzle and build plate is too big.
2) The build plate has not been leveled yet.
3) Kapton tape has not been stuck on...
Wed, 27 Apr, 2016 at 7:53 PM
The gap between nozzle and build plate too small which may cause the nozzle to
become clogged.
Wed, 27 Apr, 2016 at 8:08 PM
Please keep the build plate heated continuously; Change a new Kapton tape; Slow
down the printing speed of first layer; Use the enclosure plate to keep th...
Wed, 27 Apr, 2016 at 8:11 PM
The layer thickness is too big or printing speed is too high (the nozzle temperature
needs to do responded balance to have a faster printing speed) or the...
Wed, 27 Apr, 2016 at 8:11 PM
Temperature is too high; Or the filament is carbonized or liquefied(PLA will get
liquefied at very high temperature, ABS will get carbonized at very high ...
Wed, 27 Apr, 2016 at 8:12 PM